📄️ Modbus Rules
Modbus Rules refers to a Modbus Command that Elastel gateway act as a Modbus Master to acquire data from southbound Modbus slave devices.
📄️ ASCII Rules
ASCII Rules refers to a ASCII Command that communication between Elastel gateway and south device.
📄️ S7 Rules
S7 Rules refers to configuring the communication rule for Elastel gateway collect data from Siemens S7 series PLC.
📄️ FX Rules
FX Rules refers to configuring the rule for Elastel gateway collect data from Mitsubishi FX series PLC.
📄️ MC Rules
The MC protocol is a communication protocol used by Mitsubishi on Q series PLC for data exchange and communication with other devices.
📄️ IEC104 Rules
IEC 104 (IEC 60870-5-104) is a communication protocol used in industrial automation and power systems for remote control, monitoring, and data acquisition. It is based on TCP/IP for transmission.
📄️ DNP3 Rules
DNP3 Protocol (Distributed Network Protocol 3) is a widely used communication protocol in power systems and industrial automation for remote monitoring and control.
📄️ OPCUA Rules
OPC UA Protocol (OPC Unified Architecture) is a communication protocol designed for industrial automation, enabling interoperability between different devices and systems.
📄️ BACnet Rules
BACnet (Building Automation and Control Networks) is a communication protocol designed for building automation and control systems. It supports various communication media (e.g., IP, RS-485) between devices interoperability.
📄️ IO Setting
IO (Input/Output) ports on Elastel gateway is for connecting and communicating data with southbound devices which using IO interfaces, including ADC (Analog Input), DI (Digital Input), and DO (Digital Output).