Skip to main content

DNP3 Server

It is for configuring Elastel gateway act as DNP3 Server for Northbound DNP3 client to fetch the data which gateway collected from south devices. The data was organized by “Tag Name” which configured in south device rule. It supports DNP3 TCP or DNP3 RTU communication protocol between server and client. DNP3 server

  1. Enable/Disable the DNP3 Server feature

  2. Select communication protocol, options TCP or RTU

    1. DNP3 TCP, should configure the TCP port, dnp3 server by tcp

    2. DNP3 RTU, should configure the serial com related parameters, including Interface, Baudrate, Databit, Stopbit, Parity, dnp3 server by rtu

  3. Configure the DNP3 Slave Address

  4. Configure the DNP3 Master Address

  5. Configure theDNP3 point for the tags. dnp3 point

    1. Select the source object, source object is the data with Tag which collected from southbound device rules. All collected source objects will be listed under drop-down list
    2. Configure the Group ID, options: “BINARR_INPUT”, “DOUBLE_INPUT”, “BINARY_OUTPUT”, “COUNTER_INPUT”, “ANALOG_INPUT”, “ANALOG_OUTPUTS”
    3. Configure the Number of Points
    4. Enable/disable this DNP3 point setting